Alsa Refinish KC-MCLR Manuel d'instructions télécharger pdf

MIRRACLEAR (Clear Coat) KILLER CAN

How to Apply (Application Steps)

1 Always apply paints in a well-ventilated area, and wear a NIOSH approved respirator

to avoid breathing any fumes.

2 Make sure you have good conditions for spraying. The best temperature for spraying

this paint, is 75-80 degrees F, and VERY low humidity.

3 Apply 2-3 wet coats of Mirraclear over your existing paint, using steady even passes,

from about 6-8 inches away from the substrate, with about 10-15 minutes between

coats.

4 Mirraclear will be dry to the touch in about 2-3 hours. Allow 24 hours before handling.

Page 1

MIRRACLEAR (Clear Coat) KILLER CANHow to Apply (Application Steps)1 Always apply paints in a well-ventilated area, and wear a NIOSH approved respira

Pas de commentaire

Alsa Refinish KC-MCLR Manuel d'instructions